Create your own Natural Slate Back Panel
Shown with Std 37'' x 37'' Panel with 16.5'' x 22.5'' Cut out
Thickness of either 20 mm or 30 mm Black or Grey.
(Due to the size of these Back Panels they need transportation with Oversize Pallets, please contact prior to placing any order as delivery charges are higher than normal)
(Slate Hearths are 10-30days for Delivery at busy times quotations supplied, Please supply Postcode)
Slate Back Panel Black or Grey Slate options
Brazilian Honed or Riven Back Panel in a Brazilian Natural Slate Design your own sizes of Back Panel, Available in Solid Pieces and superb quality; the new Back-Panels are available in the same high quality Brazilian slate as the existing slate blanks. Available in your choice of designs, each one features the characteristic two tonal shading variation that is inherent in Brazilian slate and the designated edge feature choice of Beveled, Half Bullnose edge choices making them a truly eye-catching piece!
Please supply your own drawing to advise of dimensions required for quotation!
Please note: Use of the image supplied for quote to add your own dimensions, these should be entered as mm, so if a measurement is 1.2m it should be entered as 1200 or 90cm as 900. Notify the sides you want the edge finishing to be applied. For the Honed Black Slate the minimum length and width available is : 900mm x 900mm The maximum length and width available is : 2250mm x 1250mm (Black) and 1500mm x 900mm for the Grey Slate