eko 1060 LED Electric Fire (shown with Brass Elegance fret and one-piece Classic Brass Frame with Brass inlay)
Fire Type LED Electric
Chimney/Flue Requirements N/A
Control Type Manual - Switch
Heat Input (Max/Min) Gross 2.0kW / 1.0kW
Heat Output (Max/Min) Gross 2.0kW / 1.0kW
Running Costs Per Hour (Max/Min)* 31.5p / 15.76p
Outline Dimensions** W480 x H590 x D114 (mm)
Installation Inset - Fireplace
Air Vent Required N/A
Safety Thermal Trip Switch
Options Choice of fret and frames**
Inset, Semi Inset or Free-standing installation.
* Price based on 15.6p/kWh. Electricity prices may vary. Please check with your supplier.
The 1060 is a NEW electric fire featuring LED technology designed to significantly improve the flame picture and running performance. This modern technology is not only easier on the eye but it is a fraction of the cost to run a standard conventional bulb and will last longer too. To keep the operation simple you have the three control options: 1) Flame effect only, 2) Flame + 1kW Heat, 3) Flame + 2kW Heat. The controls are mounted discretely under the hood and can be accessed easily.
Also included are two detachable spacer frames to allow the fire to be installed in a fireplace; fully inset (requires a 5" fireplace depth), semi inset (3" fireplace depth) or simply freestanding without a fireplace to fit flush against a wall.
The 1060 is specified with a one piece fixed realistic moulded coal fuelbed which provides a warm under fuelbed glow that you would expect from a real gas fire. This product is covered by our comprehensive 3 year guarantee.